You will need to enter in a name for this configuration. Also ensure that
modem is checked before continuing.
Enter in the name as shown above,
and click the right arrow to continue.
iMAC - Step 5
Select the modem you are using from the drop down list above. Ensure
you have the correct port selected and tone is selected and then
click on the right arrow to continue.
iMAC - Step 6
Enter in your Local Call Access number, your username and your
password in the spaces provided ( as shown above ). Once you have done
this, click on the right arrow to continue.
iMAC - Step 7
Ensure that No is checked and click on the right arrow to continue.
iMAC - Step 8
There is no IP Configuration so ensure No is selected and click
on the right arrow to continue.
iMAC - Step 9
Enter in the DNS addresses as shown above, as well as the Domain
Name as shown above and then click the right arrow to continue.
iMAC - Step 10
Enter in your email address and your password in the spaces
provided ( as shown above ) and click on the right arrow to continue.
iMAC - Step 11
Enter in the POP as shown above and ensure you replace
your-username with your username ( For example, if my name was
Bill Smith and my username was bsmith my POP would be
bsmith@pop.konocti.net ) and you will also need to enter in the SMTP of
which details are shown in the above graphic.
Once you have done this, click
on the right arrow to continue.
iMAC - Step 12
Enter in the News address in the space provided ( as shown above ) and
click on the right arrow to continue.
iMAC - Step 13
You have now finished configuring your iMAC for connection to the internet.
To complete your Internet Settings, click Go Ahead. To connect later, you
can either use the Remote Access section of the Control Strip, or you can use
the Remote Access Control Panel.
